Transportation Vibration Tester Zero Drop Machine 0-2M PLC Package
350kg
Brand: HBYIQI
Equipment Name: Zero Drop Tester
Equipment Purpose:
The zero drop tester is mainly used to assess the impact of drop
shocks on packaging during actual transportation and handling, and
to evaluate the impact resistance of packaging during handling and
the rationality of packaging design. It is primarily suitable for
drop tests on larger packages. The machine features an "E"-shaped
fork that can move downward rapidly as the test piece carrier. The
test product is placed and balanced according to test requirements
(testing for surfaces, edges, and corners). During the test, the
support arm moves downward at high speed, and the test product
drops onto the bottom rubber pad with the "E"-shaped fork. Under
the action of high-efficiency shock absorbers, it is embedded flat
on the bottom plate. Theoretically, the zero drop tester can
perform drop tests from a zero height range. The drop height is set
through a liquid crystal controller, and the drop test is
automatically executed according to the set height.
Control Principle:
Reasonable design with imported microcomputer electrical components
to achieve free-fall testing for surfaces, edges, and corners in
all aspects.
Technical Parameters:
Model | HB-G05 |
Maximum Test Piece Weight | 0—350 Kg |
Drop Height | 0—2000 mm |
Maximum Test Piece Size | 1500×1000×500 mm |
Impact Baseplate Specifications | The impact surface is a cement baseplate with a thickness of 100
mm. The effective cement surface size is ≥ W1500*D1100 MM,
reinforced with internal steel bars. |
Test Piece Lifting Speed | <30 seconds/meter |
Support Arm Size | 700×800×40 mm (composed of 4 lightweight aluminum alloy fork rods
to reduce falling impact energy) |
Support Arm Structure | Aluminum alloy material |
Testing Aspects | Surfaces, edges, corners |
Drive Mode | Servo motor drive |
Protection Devices | Inductive protection devices installed at the top and bottom |
Drive Mode | Servo motor drive |
Drop Height | Set via PLC touchscreen programming |
Transmission Mode | Taiwan-imported linear sliders and hardened guide rods |
Acceleration Device | Spring type |
Drop Mode | Pneumatic type |
Equipment Weight | Approximately 1000 kg |
Equipment Dimensions | Approximately 1700×2100×2400 mm |
Working Power Supply | 220V/50HZ |
Power Consumption | 3KW |
Required Air Source | ≥6 kg (provided by the customer) |
Forklift Positions | The equipment base is reinforced with channel steel welding and
designed with forklift positions for convenient transportation. |
Purchasing and consulting
We designate the experienced engineer and a foreign trade
salesperson to answer your every question by multi-way of
communication. We put a high value on your every requirement and
will be honest and trustworthy, convenient and efficient mode to
provide solutions and the most suitable equipment for you.
Service and maintenance
Our equipment maintenance experts are able to provide regular
maintenance, repair and calibration of equipment systems to ensure
that the system is always working at its best and strive to nip
faults in the bud, thereby reducing maintenance costs and
significantly extending the service life of measurement systems.
Upgrading and rebuilding
We will upgrade and rebuild the control system, software system and
even the transmission system to make your equipment system under
the best status, so that the technical advancement of the equipment
has been greatly improved.
Installation and training
Before installation, please read the instruction manual; This
manual introduces the detailed instruction of how to use the
machine and all software functions. We also support training video
to better solve your problems on time.
For more information, please contact a salesperson.
