Programmable Thermal Shock Test Chamber 1000L
Brand: HBYIQI
Equipment Name: 1000L Programmable Thermal Shock Test Machine
Relevant standards or equivalent requirements:
Complies with the following tests in national standards such as GB,
GJB, ISO, IEC, ANSI, ASME, ASTM, JIS, BS, DIN, NF, UNI, TNAI, AS,
BDSI, CAS, CA, COSQC, S., CSA, CSK, CSN, DGN, DGNT, DS, ELOT, E.S.,
ESI, GS, ICONTEC, INAPI, INEN, IOS, IRAM, IR, ISIRI, ITINTEC, IS,
JS.S, JUS:
- High-temperature test
- Low-temperature test
- Temperature Shock test
Application:
The thermal shock test chamber is a device used to simulate
climatic environments. This equipment is applicable to aerospace
products, information electronic instruments and meters,
automobiles, new energy, materials, electrical engineering,
electronic products, and various electronic components. It is used
to test their tolerance and reliability in rapidly changing extreme
temperature environments, verify the various performance indicators
of products, and simulate in advance the chemical changes and
physical damage caused by different extreme environments. By
exposing products to extreme temperature environments for a short
time, it accelerates product screening, thereby identifying
defective components or materials. It is an indispensable test
equipment in the processes of research and development, production,
and quality control.
Technical Parameter
| Model | HB-TS-2-1000L (A/B/C/D/E) |
| Volume | 1000L |
| Inner Chamber Dimensions (cm) | W100*D100*H100 |
| Outer Chamber Dimensions (cm) | According to the design |
| Impact Temperature Range | Type A: -20°C to 150°C
Type B: -40°C to 150°C
Type C: -50°C to 150°C
Type D: -60°C to 150°C
(Other temperature ranges are available upon customization) |
| High-Temperature Chamber | Temperature Range | +60°C to +180°C |
| Heating Rate | RT to 180℃ for approx 30min |
| Low-Temperature Chamber | Temperature Range | 0°C to -40°C / 0°C to -70°C |
| Cooling Rate | RT to -70℃ for approx 60min |
| Test Area (Basket) | High-Temperature Exposure Temperature Range | +60°C to +180°C |
| Low-Temperature Exposure Temperature Range | 0°C to (-20)(-40)(-50)(-60)(-70)°C |
| Temperature Resolution | 0.01°C |
| Temperature Fluctuation | ±1°C |
| Temperature Deviation | ±2°C (when <150°C), ±3°C (when >150°C) |
| Basket Conversion Time | ≤10sec |
| Temperature Recovery Time | ≤5min |
| Test Exposure Time Requirement | ≥30min |
| Impact Time | 0 - 999H (programmable) |
| Cycle Period | 1 - 999 times (programmable) |
| Control System | PLC balanced temperature control programmable control system |
| Language | Supports Chinese and English |
| Refrigeration System | Adopts well - known brand compressors and well - known
refrigeration system components |
| Heating System | Adopts nickel - chromium alloy electric heating wires |
| Protection Devices | Leakage protection, short - circuit protection, over - temperature
protection, phase - loss protection, compressor overload and over -
heat protection, fault alarm system. |
| Shelves | 2 pieces are standard (more are available as options) |
| Wiring Hole | Ø50mm/1 piece |
| Voltage (V) | 380V |
| Power (KW) | Subject to design |
| Weight (KG) | To be confirmed before shipment |
| Others | Customizable sizes are available |
Equipment Detail Display
Main Interface:
Two-Chamber Temperature Shock Curve Diagram
Test Mode:
Schematic diagram:
For more inquiries, please contact HBYIQI directly. Thanks.
